Overview

After you created sessions for a specific time period in Rapla, it is ready to synchronise these sessions to Paradigm. The workflow on this article assumes that your data (sessions) in Rapla meets the requirements for the data migration to run without causing errors in Paradigm. This knowledge article will guide you on how to set up the integration between Rapla and Paradigm.

BE ADVISED

You must review the data entry in Rapla before you proceed to the Workflow below. Some of the required and critical fields with data are listed on the table below for review. All these fields are also mentioned in the Create Sessions or Events page.

WARNING

In the event you require to make changes on the details of the session in Rapla after the initial session synchronisation, you have to make sure that there are no enrolments link to the sessions prior to making the changes and do the resync. If you already have enrolments on the sessions that you want to make the changes to, we recommend you to take the following steps:

Delete all Session Enrolments and Attendance Records
Make the changes in Rapla >> sync the changes back to Paradigm
Re-enrol the students to the session with their updated attendance records

If you are using the Session Group/Class, we would advise you to not make any changes to the sessions and do the resync, especially if there are already enrolments involved – as that would complicate things further.

More details on the implications and level of impact to the changes you will make when doing a resync are documented here: Resync to Paradigm: Level of Impact and its Implications.

Please contact our Support Team if you have questions on resyncing.

Required fields for Review

NOTE:

The first image below represents the field names in Rapla as well as its equivalent field names in Paradigm (highlighted in red box) when creating a new Event (i.e. Paradigm session).

The table below the image shows you the fields in Rapla match to the fields in the Scheduled Units (you already created prior to synchronise Rapla sessions) in Paradigm for the sync to be successful, see Search, Add and Edit Scheduled Units knowledge article to double check if the scheduled units have already been created in Paradigm.

Rapla Field Names	Paradigm Scheduled Unit Field Names	Brief Overview	Sample Data

Rapla Field Names	Paradigm Scheduled Unit Field Names	Brief Overview	Sample Data
Unit Code	Unit Code (s)	Your allocated unique Unit Code to identify a unit of study (Scheduled Unit). MUST be the same coding in Paradigm.	FIT9130
Unit Name	Scheduled Unit Name	Institution allocated unique unit names to identify units of study This field should not necessarily be the same as the unit name you’ve coded in Paradigm. You can customise the unit name in Rapla if need be to help in your data entry. e.g. ‘Entertainment Since 1945’ in Paradigm and ‘Entertainment Since 1945 Group 1’ in Rapla to emphasise grouping.	Systems Analysis and Design
Campus	Home Institution	Your Business or Institution’s Name or a specific location of one of your branches if you have multiple campuses. This field will only be a red flag if you have multiple campuses. Should match the Provider record in Paradigm where the scheduled unit/s to be imported are/is under.	Melbourne or SBUNI
Session Type		Lecture/Tutorial/Workshop	Lecture
Delivery Mode	mode Of Delivery	On Campus/Online/Other Make sure that there is a matching recorded scheduled unit in Paradigm with the same delivery mode as set in Rapla. If a unit has one or more delivery modes, create a new scheduled unit for each delivery mode in Paradigm before you attempt to synchronise.	On campus
Department		Faculty/Department Name	Faculty of Information Technology
Appointment details	Should be within the Scheduled Unit’s Start Date and End Date fields	Jun 1, 2019 repeating frequency, any exceptions Make sure that the dates here are WITHIN or THE SAME as the dates recorded in Paradigm for your semester (Time Period) start and end dates.	Jun 3, 2019 9 - 11am, repeat every Monday
Resource allocations		Teaching staff, facility and equipment resources	Teaching Staff Name, at Lecture Room A201

Workflow

How to synchronise Rapla Sessions to Paradigm

1 & 2. Log into your Paradigm account. Choose System > Rapla Session Import from the side menu.

It will direct you to the following screen:

3. Enter the Semester Start and End Date of the sessions that you want to import.

Rapla (Periods > Edit/Add)	Paradigm (System > Edit Time Period)

Rapla (Periods > Edit/Add)	Paradigm (System > Edit Time Period)

4. Enter a Session Unit Code (optional) if you only want a specific or ONE unit code to be imported. Leave this field blank if you want ALL the Paradigm Sessions created within the dates of your specified semester start and end dates from step 3 (imported or synced to Paradigm).

Rapla (Create Sessions or Events)	Paradigm (Search Add Scheduled Units)

Rapla (Create Sessions or Events)	Paradigm (Search Add Scheduled Units)

5. Select a Scheduled Unit Provider that you want to import across from Rapla.

Rapla (Create Sessions or Events)	Paradigm (Search Add Scheduled Units)

Rapla (Create Sessions or Events)	Paradigm (Search Add Scheduled Units)

6. Click the UPDATE SESSIONS button.

_{Introduction to Rapla}_|_{1. Install Rapla}_|_{2. Get Familiar with the Rapla User Interface}_|_{3. Create Users}_|_{4. Add Resources: Facility, Equipment, Staff}_|_{5. Create Time Periods}_|_{6. Create Sessions or Events}_|_{7. Publish Rapla}_|_{8. Synchronise Sessions to Paradigm}