TCSI Error Code - 10125

The Discipline Code (E464) has been reported at the broad (two-digit) level.

TCSI Error Description

Please check the Discipline Code (E464). Where possible, it should be reported at the detailed level (six digits). If this is not possible, it must be reported at the narrow level (four-digits). That is, the last four digits must not be '0000'.

Error Logic

If the Discipline Code (E464) is not blank (null), then the last 4 characters of the Discipline Code (E464) must not be '0000'.

Paradigm Error Resolution

This error occurs when the field (HEIMS Discipline: E464) of discipline code on the scheduled unit is blank. This occurs when the field was not set on the base unit at the time when the scheduled unit was created. Update the field on the scheduled unit as required, and check that the field is also set on the base unit to avoid a repeat of this error in the future.

To edit the HEIMS Discipline field on the Scheduled Unit Level:

1 Load the scheduled unit, _{(see How to Search for a Scheduled Unit).}

2 Look for the HEIMS Discipline field. Set the discipline field accordingly.

Open

Also update the field on the Base Unit Level to avoid a repeat of this error in the future:

1 Load the base unit, _{(see How to Edit a Base Unit Record in Paradigm).}

2 Go to the EDIT HEIMS DETAILS section and edit the HEIMS Discipline field accordingly.

Open

_{Main Page >> TCSI Validation Errors FAQs}